sheet metal tube making machine DLC1000

Sheet metal tube making machine

Application:

The machine is used to make the sheet metal tube, it bend the sheet metal into

cylindrical tube. the tube wall can reach up 6mm.

Feature:

good accuracy, no straight edge and pre bending job required by the three roll bending machine

one rolling required only, one job need 10-15 seconds

two options: manual and auto bending

Technical parameter:

Power: 380V, 50hz

rated power: 4.5kw

hydraulic pressure range: 0-20Mpa

Sheet metal tube wall thickness: 0.5-6.0mm

tube diameter range: 80-1000mm

tube length range: 100-1500mm