fishing Lead sinker making machine

fishing Lead sinker making machine is used to make the fishing lead shinker.

for more information please contact us.

Capacity: 200 sinkers/minute

power: 1.5kw

weight: 300kgs

10z to 6oz lead sinkers can be made on DLC fishing lead sinker forming machine.
if spec need one set of mould, it means 6 sets of moulds are required. Each mould can
make 30-40 sinkers per shift according to the sinker shape or size.
every minute can produce two shifts/cycles. that's to say
you will get 60-80 sinkers per minutes.

THE ABOVE ARE THE DIFFERENT LEAD SINKERS MOULDS

Beside the lead sinker forming machine, a unit of lead melter is required.
the lead melter initial start nelting 100kgs leads for 40 minutes, after about 1/3 lead
used out, then fill it with lead block/scraps again. it will melt instantly.

the working process is the following:
1. melt the lead scraps/blocks
2. put the sinker loops one by one in the mould

3. pour the liquid lead into the sinker mould
4. grip the mould tightly and installed on the forming machine.

5. the forming machie will rotate eccentialy, and keep the liquid lead filled the mould
cavity entire full.

6. after cooled, take apart the mould and take out the casted lead sinker.

 the mould is made of special engineering silicone rubber.